Cara Reset Printer Canon IP1980 Secara Total

Bagi Anda yang mempunyai Printer Canon IP 1980, mungkin suatu saat akan mengalami pinter yang Anda pakai tidak bisa langsung mencetak dokumen, lampu indikator berkelap-kelip dan muncul pesan “The ink absorber is almost full”.





Solusi sementara yang mungkin Anda lakukan adalah menekan tombol RESUME seperti yang diperintahkan dalam pesan tersebut. Untuk sementara Anda bisa mencetak dokumen, tetapi kejadian ini terus berulang dan bahkan mungkin sampai printer tersebut hanya menampilkan lampu indikator yang nge-blink saja, tidak bisa ngeprint sama sekali.

Kondisi tersebut sebenarnya umum terjadi pada printer inkjet. Pada printer tersebut terdapat tempat pembuangan tinta atau biasa disebut waste ink tank, didalam tempat pembuangan ini terdapat bahan semacam busa (ink absorber) untuk menyerap tinta buangan dari Catridge, misalnya ketika printer melakukan proses cleaning head.


Untuk mencegah melubernya tinta buangan tersebut, maka pihak pabrikan membuat semacam counter yang akan menghitung jumlah print out dari printer, ketika telah mencapai batas tertentu itulah kondisi “waste ink tank full” atau “ink absorber is full” terjadi dan biasa ditandai dengan indikator LED yang kelap-kelip.


Untuk mengatasi hal tersebut Anda bisa melakukan dengan cara mereset printer secara manual atau dengan menggunakan tool resetter printer. Kekurangan dari mereset printer secara manual yaitu ketika listrik mati akan terjadi lagi kondisi “ ink absorber full” atau semacamnya dan printer harus di-reset kembali.


Dalam artikel ini saya akan coba berbagi pengalaman tentang cara mereset Canon IP1980 secara total dengan cara manual dan dilanjutkan dengan menggunakan tool resetter sehingga printer bisa normal kembali.
Cara Reset Canon IP1980 Secara Total

1. Download terlebih dahulu General Tool Canon IP1900 series, Anda bisa mendownloadnya disini
2. Matikan Printer, lalu lepaskan kabel power
3. Sambil menekan tombol ON pasang kembali kabel power
4. Masih tetap menekan tombol ON, tekan 2x tombol RESUME
5. Lepaskan kedua tombol.
6. Dalam tahap ini printer dalam kondisi temporary reset dan untuk meresetnya secara total, jalankan aplikasi General Tool Canon IP1900 yang telah Anda download.
7. Tunggu sejenak sampai program mendeteksi adanya printer seperti terlihat pada gambar dibawah.
8. Setelah printer terdeteksi, centang pilihan EEPROM Clear dan klik tombol Test Pattern 1
9. Masukan kertas kosong karena printer akan segera melakukan print test.
10. Setelah printer selesai ngeprint, klik tombol Main dan Platen kemudian klik tombol Quit untuk keluar.

Sekarang Anda telah melakukan reset  Canon IP1980 secara total. Untuk mencobanya silahkan matikan printer kemudian nyalakan lagi, klo Anda berhasil maka printer akan kembali normal dan bisa dipake untuk ngeprint kembali tanpa terganggu pesan error seperti diatas.

Smoga Bermanfaat

Husni Elektro

Sumber:fastncheap

Read more »

Posted in: Free Resetter Canon,Printer,Tips Komputer dan Elektronik

How To Fix Mp258 P07 Error 5B00

This post discusses about Resetter Canon Mp258 P07 Error 5B00. Since many who seek MP258 resetter software for error 5B00 or P07, then let's go straight to the scene ......

Early indications Mp258 P07 Error 5B00 :

When the printer is turned on will show an error MP258 P07 on the LCD panel and the monitor screen will display an error 5B00.

How Resetter Canon Mp258 P07 Error 5B00:

1. Turned off MP258 Printer which Error 5B00 or P07.
2. Press STOP / RESET and hold, then press and hold the POWER button.
3. While POWER button is pressed, release the STOP / RESET, then press the STOP / RESET 2 times in a state of the power button is pressed.
4. Release both buttons simultaneously.
5. MP258 Printer which Error 5B00 or P07 will proceed in a while, then the LCD panel on MP58 will show zero number (0).
6. The computer will detect a NEW DEVICE, Ignore it .....
7. This situation indicates the MP258 printer which Error 5B00 or P07 is in a state SERVICE MODE and ready to reset with software.

DOWNLOAD PROGRAM RESETTER 5B00 or P07 MP258 error HERE. (NO PASSWORD) :

http://www.ziddu.com/download/12361840/ServiceTool_V1074MP258.zip.html

• Exctract MP258 Resetter Files for error 5B00 or P07
• Prepare 2 paper in the printer (this is to print at the time the process of resetting)
• Run the Resetter for MP258 P07 error 5B00
• Click "MAIN", then the printer will proceed, then MP258 will print one page with the words "D = 000.0"
• Click the "Clear EEPROM".
• Then click the "EEPROM", and the printer will print the results MP258 Resetter. One of the writing row as follows:

"TPage (COPY TTL = 00 000 = 00 000)"

• Turn off the printer by pressing the POWER button.
• And the MP258 Printer which Error 5B00 or P07 is ready for use again.
• Done.

Read more »

Posted in: Free Resetter Canon

How to Reset Canon IP2770 Error 5B00

This time I will share about  How to Reset Canon IP2770 Error 5B00. I was try this resetter and runs perfectly. 100% working. This resetter no passwords ... and FREE

How to Reset Canon IP2770 Error 5B00

Download Canon iP2770 Resetter v1074 no password below:

http://www.ziddu.com/download/11980752/ServiceTool_V1074_iP2770.rar.html


Do not forget to turn off the download manager, so the iP2770 Resetter successfully downloaded.

Go to the iP2770 Service Mode :

• The printer is off and plugged the power cord.
• Press the RESUME button two seconds
• then press the POWER button until the green light flame (while pressing the POWER button, ... don't release RESUME button)
• Then release the Resume button, but do not release the POWER button.
• POWER button while still pressed, press the Resume button 5 times. Led will flash alternately orange glow green with the last orange. (not to mistaken 4x because the printer will be totally dead, but it is temporary as well) Then ...
• Release both buttons simultaneously.
• Led will blink briefly and then will glow GREEN.
• The computer will detect new devices, please ignore .....
• This situation is called SERVICE MODE iP2770 and iP2770 ready to be reset.

Then run Canon iP2770 Resetter v1074 :

• Exctract File iP2770 Resetter.
• Prepare a two paper in the printer (to print at the time of the reset process).
• Run the program iP2770 Resetter
• Click "MAIN", then the printer will proceed and iP2770 will print one page with the words "D = 000.0"
• Click the "EEPROM Clear".
• Then click the "EEPROM", and the printer will print the results off iP2770 Resetter. One of the writing row as follows:
• "TPage (TTL = 00 000)"
• Turn off the printer by pressing the POWER button.
• Done ...

Good luck

Read more »

Posted in: Free Resetter Canon

How to Resetter Canon MP198 error E27

I was often get questions about how to reset Canon MP198, and this time I want to share about How to Reset Canon MP198 with error E27.


How to Resetter Canon MP198 error E27 : prepare in service mode :

• The printer is off and plugged the power cord.
• Press and hold STOP / RESET then press and hold POWER.
• Release the button STOP / RESET (POWER button should not be released)
• Press STOP / RESET 2 (two) times, then release the POWER button
• Let green LED blink until the printer head stops moving. And the LCD panel shows number 0 (zero).
• The computer will detect new hardware, just ignore it.
• This situation meaning that Canon MP198 printer is in the SERVICE MODE and ready for reset.
• Next  Step run MP198 Resetter, if  you don't have it, please download Resetter MP198 at this link http://www.ziddu.com/download/12372220/ServiceTool_V1074MP198.zip.html

How to Resetter Canon MP198 error E27 :

• Exctract File Resetter MP198.
• Prepare a second paper in the printer (to print at the time of the reset process)
• Run the program Resetter MP198.
• Click "MAIN", the printer will proceed, then MP198 will print one page with the words "D = 000.0 ....."
• Click the "EEPROM Clear".
• Then click the "EEPROM", and the printer will print the results of Resetter MP198. One of the writing row as follows : "TPage (COPY TTL = 00 000 = 00 000)"
• Turn off the printer by pressing the POWER button.
• Done ...

Good luck.

Read more »

Posted in: Free Resetter Canon

How to Fix Error B200 on Canon iP2770 and MP258

This time I will share experiences about How to Fix Canon iP2770 and MP258 with Error B200. This question is often asked and I will answer now. This answer is from my friend who want to share about his experience.

How to Fix Error B200 on Canon iP2770 and MP258 :

Here is step by step to fix Error B200 on Canon iP2770 and MP258, but No Result ( Unclear) :

• Reset Printer with software resetter = unclear.
• Press Resume button 15 - 25 minutes, print result is not good.
• Replace the catrid with the new one = result is unclear.

Finally this is the way How to Fix Error B200 on Canon iP2770 and MP258 :

Replace power supply / adaptor on your iP2770 or MP258. And the error B200 on iP2770 and MP258 will soon be resolved.

This picture is just an illustration.

Read more »

Posted in: Free Resetter Canon

Reseter Printer Canon - How to Reset Canon IP2770 with Error 5200

This time, I will try sharing on How to Reset Canon IP2770 Error 5200. IP 2770 is a new printer, and I also at the first time get error 5200 on canon iP2770. Want to know how ...?

Early Indication:
When the iP2770 is turned on, the printer looks normal with GREEN LED on. But when ordered to print, then the 5200 on iP2770 error will appear, and the LED will blinking 8x green 1x orange.

How To Reset Canon IP2770 Error 5200 :

1. The printer is off and plugged the power cord.
2. Press the RESUME button two seconds,
3. then press the POWER button until the green light flame ( while pressing the POWER button, don't released RESUME button )
4. Then release the Resume button, but do not release the POWER button.
5. POWER button while still pressed, press the Resume button 5 times. Led will flash alternately orange glow green with the last orange. (not to mistaken 4x because the printer will be totally dead, but it is temporary as well) Then ...
6. Release both buttons simultaneously.
7. Led will blink briefly and then will glow GREEN.
8. And the computer will detect new hardware, just ignore ...
9. Press the POWER button, then the printer will off.
10. Press the POWER button again then the printer will on and ... PRINTER iP2770 is ready to use.

Other way on How To Reset Canon iP2770 error 5200 :

1. Turn the printer, and printer will look normal.
2. Run the printer for printing a document or a print test, then the 5200 error will appear.
3. Directly unplug the power cord without pressing on/off button
4. Open it and slide it into the middle of its cartridges manually
5. Unplug all cartridges and leave the lid open
6. Turn on the printer, head carriage will move left and right because the lid is still open and will stop in the middle.
7. Replace the cartridge, and close the right
8. The printer will return to normal.

Read more »

Posted in: Free Resetter Canon