How to Reset Canon IP2770 Error 5B00

This time I will share about  How to Reset Canon IP2770 Error 5B00. I was try this resetter and runs perfectly. 100% working. This resetter no passwords ... and FREE

How to Reset Canon IP2770 Error 5B00

Download Canon iP2770 Resetter v1074 no password below:

http://www.ziddu.com/download/11980752/ServiceTool_V1074_iP2770.rar.html


Do not forget to turn off the download manager, so the iP2770 Resetter successfully downloaded.

Go to the iP2770 Service Mode :

• The printer is off and plugged the power cord.
• Press the RESUME button two seconds
• then press the POWER button until the green light flame (while pressing the POWER button, ... don't release RESUME button)
• Then release the Resume button, but do not release the POWER button.
• POWER button while still pressed, press the Resume button 5 times. Led will flash alternately orange glow green with the last orange. (not to mistaken 4x because the printer will be totally dead, but it is temporary as well) Then ...
• Release both buttons simultaneously.
• Led will blink briefly and then will glow GREEN.
• The computer will detect new devices, please ignore .....
• This situation is called SERVICE MODE iP2770 and iP2770 ready to be reset.

Then run Canon iP2770 Resetter v1074 :

• Exctract File iP2770 Resetter.
• Prepare a two paper in the printer (to print at the time of the reset process).
• Run the program iP2770 Resetter
• Click "MAIN", then the printer will proceed and iP2770 will print one page with the words "D = 000.0"
• Click the "EEPROM Clear".
• Then click the "EEPROM", and the printer will print the results off iP2770 Resetter. One of the writing row as follows:
• "TPage (TTL = 00 000)"
• Turn off the printer by pressing the POWER button.
• Done ...

Good luck

Posted in: Free Resetter Canon