Panduan Cara Setting Modem Speedy

Ahir-ahir ini speedy lemot banget ya??

huft!! cape deh kalo gini terus.. bikin jengkel aja, dan sampai sekarang ku masih bertanya-tanya ada apa sih speedy sekarang kok jadi lemot banget??

karena penasaran ku jadi kunjungi website speedytelkom, cari tau sebenarnya ada masalah apa dengan speedy. baca-baca gak ketemu alasan mengapa speedy sekarang jadi lemot., wah! payah kalo gini terus.. eh palah ahirnya ku nemu cara setting modem speedy dari berbagai merek..

nah ini dia..!!

Eiiits!! ni bukan setting modem speedy biar jadi cepet lho!!

ni cara setting modem biar bisa konek ke internet.., hem.. siapa tau ada agan-agan yang lagi jengkel ma speedy sampai mencet-mencet tombol RESET ato mbanting modem nya terus beli lagi dan gak tau cara setting modemnya..

nah!! langsung aja ni Cara Setting Modem Speedy dari awal..

Informasi setting modem yang digunakan untuk layanan Telkom Speedy

Adsl Modem SMC

Default IP: 192.168.2.1
Default password: smcadmin
Setting Bridge:

Klik WAN
Clik ATM PVC
Klik VCI
Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
Klik Save Settings

Setting PPPoE:

Klik WAN
Clik ATM PVC
Klik VCI
Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: nmrspeedy@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
Klik Save Settings

Adsl Modem ZyXeL
P-660R
Default IP: 192.168.1.1
Default username: admin
Default password: 1234
Setting Bridge

Pilih Network
Pilih WAN
Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
Pilih Maintenance
Pilih Tools
Restart

Setting PPPoE

Pilih Network
Pilih WAN
Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
Klik Maintenance
Klik Tools
Restart

Adsl Modem Shiro

Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

Klik Advanced
Klik WAN
Klik New Connection
Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
Save Settings
Restart Router

Setting PPPoE:

Pilih Advanced
Klik WAN
Klik New Connection
Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
Save Settings
Restart Router

Adsl Modem Aztech
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge

Klik Advanced
Pilih WAN
Klik New Connection
Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
Save Settings
Restart

Setting PPPoE/Router:

Klik Advanced
Pilih WAN
Klik New Connection
Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
Save Settings
Restart

Adsl Modem TECOM

AR1031
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

Klik Advanced Setup
Klik WAN
Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
Cheklist Enable Bridge Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot

Setting PPPoE:

Klik Advanced Setup
Klik WAN
Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
Cheklist Enable WAN Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot

Modem Prolink

Login To -> http:// 10.0.0.2
User Name: admin
Password: password
Klik . . . . OK
Chose Configurasi WAN:
Select Adapter: Pilih Pvc3 (Indonesia)
Edit Field:
Bridge = Enable
Encapsulation = 1483 Bridge IP LLC
ATM VPI = 8
ATM VCI = 81
Static IP Setting: � just blank �
IP Address = just empty
Subnet Mask = just empty
Gateway = just empty
User Name = username@telkom.com. . . . . . ( optional ) *
Password = xxxxxxxx . . . . . . . . . . . . . . . . . . .( optional ) *
* If you choose to put username & password there just double clik explorer
* If you not choose to put username & password there you have to create new connection at Network Connection
Create New Connection (Bridge) See here..>>
Than Next:
* Klik Submit
* Klik Save Configuration
Next: Save Reboot ....

Adsl Modem D-Link

DSL-302T
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

Klik Setup
Klik Connection
Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
Klik Tools
Klik System Commands, Save All, Restart

Setting PPPoE/Router:

Klik Setup
Klik Connection
Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: nmrspeedy@telkom.net; Password: (password dari telkom); VPI=8; VCI=81, Apply
Klik Tools
Klik System Commands. Save All, Restart

adsl Modem Repotec

Buka Internet Explorer ketik: http://192.168.1.1
Username: admin & Password: epicrouter
Klik: OK
Klik WAN
Pic Adapter: Pvc0
Klik Submit
Virtual Circuit = Enabled
Bridge & IGMP = Disable
Each region was different from another region and for Bandung vpi:8 , vci: 81
Service Category = UBR without PCR
Protocol/Conection type = PPPoE
Encapsulation = LLC/Snap-Bridging
Put Username & Password from your provider
Klik Submit.
Klik Save Configuration (wait till Saving configuration done.)
put DNS: 202.134.0.155 & 202.134.2.5

Adsl Modem Dareglobal

Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

Klik Advanced Setup
Klik WAN
Find VPI/VCI: 8/81, Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
Cheklist Enable Bridge Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot

Setting PPPoE:

Klik Advanced Setup
Klik WAN
Cari VPI/VCI: 8/81, Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
Put your PPP Username: Nomorspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
Centang Enable WAN Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot

Adsl Modem TP-Link

Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

Klik Advanced Setup
Klik WAN
Find VPI/VCI: 8/81, Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
Cheklist Enable Bridge Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot

Setting PPPoE:

Klik Advanced Setup
Klik WAN
Find VPI/VCI: 8/81, Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
Cheklist Enable WAN Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot

Setting Modem Articonet ACN-100R dan ACN-110

Cara melakukan setting di komputer untuk akses ke modem Articonet.
Untuk setting di komputer dilakukan sesuai dengan operating system yang dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows XP.
Lakukan network setting di PC (komputer) sbb:
a. Start � Control Panel � Network Connection
b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties
c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General.
d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK.
Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE)
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" disebelah kanan tabel WAN Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = PPPoE
Encapsulation = LLC, kemudian klik tombol Next
Masukkan username dan password Speedy, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable WAN Service", kemudian klik Next dan klik tombol Save
Setting PPPoE untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge.
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = Bridging
Encapsulation = LLC, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable Bridge Service", kemudian klik Next dan klik tombol Save
Setting Bridge untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)
Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer.

Panduan instalasi Dial Up koneksi ADSL menggunakan Windows 2000: